FlatLink 0005001 Winch Cable Shackle Mount

This product has a non-specific fitment that may not be made for a given vehicle. Modifications may or may not be needed to use this product on your vehicle. Please check the product description below.

Product Description

Factor 55 eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winch. With less than 1-3/4 Inch of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets. Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 Inch in diameter. The cable eye is retained in the FlatLink by a 5/8 Inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips.

• Precision Machined From 6000 Series Aluminum
• Compatible With All Roller Fairlead License Plate Mounting Brackets
• When Folded Flat - Less Than 1.75 Inch Of Thickness
• Fits Steel Cables And Synthetic Winch Ropes To 3/8 Inch Diameters
• EPDM Rubber Guard Protects Alloy Fairleads And Cushions Line Stowage
• Simple Snap Ring Removal For Shear Pin
• Eliminates Hook Rattle And Fairlead Damage
• Limited 1 Year Warranty